Salvage Pontoons

JOINT ZONE PONTOON SALVAGE BAGS

FEATURES

• Joint Zone pontoon salvage bags have several important and distinctive characteristics.
• Due to the polyester fabric and its EVA/PVC copolymer coating, the material is very flexible and very easy to repair (with glue or a hairdryer with hot air)
• Joint Zone pontoon salvage bags are made of a very strong coated polyester fabric with a tensile strength of no less than 8,000 N/5 cm
• Joint Zone pontoon salvage bags have no sharp corners (they are rounded off and smooth), which makes these enclosed flotation bags more robust and less likely to be damaged
• Joint Zone pontoon salvage bags are lightweight! Up to 50% lighter than the competition's enclosed flotation bags, while the lift capacity is at least 10% higher
• The pontoon salvage bags require little maintenance and are very easy to clean
• Due to the high-strength polyester fabric type IV, the material with which the pontoon salvage bags are made has a puncture resistance of no less than 2,150 N (in contrast to many competing products that only reach 1,750 N)

TOP QUALITY MATERIAL

• EVA/PVC copolymer coated polyester fabric - high-strength and heavy-duty
• Fabric's tensile strength: 8,000 N/5 cm
• Puncture resistance: 2,150 N (in contrast to competitor's products, which often do not reach more than 1,750 N)
• Resistant to many chemicals
• High UV-resistance
• Very easy to repair (with glue or a hairdryer with hot air), unlike materials coated with PU or TPU
• Highly flexible and lightweight material
• Equipped with a ¾" stainless steel ball valve
• Equipped with pressure relief valves

Each Joint Zone lift bag is tested prior to shipping.
Custom Sizes available.
All Joint Zone lifting bags are IMCA D-016-AIRBAGS compliant.

SUBSALVE SALVAGE PONTOONS

Totally-enclosed, cylindrical bags are ideal for shallow water salvage, reducing the draft of a vessel or raising an object closer to the surface. They are invaluable in cable and pipeline operations and where long tows are planned.

Fabric

• Urethane-coated nylon—high-strength and heavy-duty
• Superior abrasion resistance
• Resistant to most petro-chemicals
• UV-resistant
• Low maintenance requirements and easy to clean
• RF welded seams

Fittings

• Replaceable, heavy-duty nylon webbing lift harness is built into the body of the lift bag,
• with a safe working ratio of 6:1
• The harness maintains the lift bag in a horizontal position while insuring maximum stability
• Equipped with shackles, valves and all necessary hardware for immediate use
• 3/4" NPT inflation port with 3/4" stainless steel ball valves for inflation and deflating
• Stainless steel quick disconnect for inflation
• Pressure relief valves set to release at 2.5psi above ambient pressure

Available in both standard cylinder and elongated tubes

CAUTION: Salvage Pontoons have multiple attachment points. All attachment points
must be connected with the shackles provided, and the load evenly distributed. Large
pontoons may require a separate lifting beam to evenly distribute the load.

• Each SUBSALVE USA lift bag is tested prior to shipping.
• Custom sizes available.
• All Subsalve USA products are compliant with IMCA D-016-AIRBAGS, ABS,
• U.S. Department of Defense Standards.